Att Trimline 265 User Manual download pdf (Page 23)

FEATURE SETTINGS

Set Local Area Codes (LACs)

Local area codes are area codes associated with other telephone numbers for which you

must dial the area code, but do not need to dial 1. This includes your own area code if

you must dial the area code but not 1 to make calls in your own area code.

Up to four local area codes can be programmed.

Do not program area codes for which you must dial a 1.

If you dial… For… Then, in steps 2-4

11 digits

(1 + area code + phone

number)

All calls outside your own

area code

Make no entry.

10 digits

(area code + phone

number)

Some calls outside your own

area code

Enter area codes that do

not require a 1.

10 digits

(area code + phone

number)

All calls within your own area

code

Enter your own area code.

1. After setting the home area code (or press OPTIONS three times from the idle

screen), the screen will display:

2. Press S or T until the screen displays the first digit of the first local area code. Do

not use the keypad to enter digits.

3. Press DISPLAY DIAL to save the digit and advance to the next digit.

4. Repeat steps 2 and 3 for the second and third digits of the local area code.

5. Press OPTIONS to program another local area code when the screen displays:

6. Repeat steps 2-5 to enter the digits of the next local area code.

7. Repeat steps 2-5 to program a third and fourth local area code.

8. Press OPTIONS to save the local area codes and continue to set the time/date.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

No comments

Att Trimline 265 User Manual Page 23