Att E5655 User Manual download pdf (Page 23)

Telephone Operation

Base settings

Handset Locator

This feature is used as an aid to locate the handset(s). It

can only be activated from the base. Press

SELECT/MENU and then press the ^ or V key until

the HANDSET LOCATOR option is shown. Press

SELECT/MENU. The screen on the base will show

"PAGING ALL HANDSETS" and start the paging

tone at the handset(s) for 60 seconds.

To stop the paging tone, press PHONE, SPEAKER or

press any dial pad key on the handset or press CLEAR

on the base.

NOTE:

The handset ringer volume also determines the level of the pag-

ing tone. If the handset ringer volume level is set to off (0), that handset will

be silenced for all calls and paging (see page 17).

Display Base ID

Press SELECT/MENU and then press the ^ or V key

until the DISPLAY BASE ID option is shown. Press

SELECT/MENU to show the base ID number. This num-

ber can be used when adding, replacing, or re-register-

ing handsets (see page 46-48).

Dial Type

At this menu you can choose Tone or Pulse dialing. The

factory default setting is TONE. Change this to PULSE

only if you do not have touch-tone dialing service.

Use the ^V buttons to select TONE or PULSE, then

press SELECT/MENU to save your preference.

NOTE:

This sets the dial type for both the handset(s) and the base.

DIAL TYPE

TONE

>HANDSET LOCATOR

DISPLAY BASE ID

>DISPLAY BASE ID

DIAL TYPE

91-000373-030-000_E5655_R4.qxd 11/1/2005 10:04 AM Page 21

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

No comments

Att E5655 User Manual Page 23