Att 972 User Manual download pdf (Page 18)

TELEPHONE OPERATION

Automatic Line Selection

Automatic Line Selection is preset to be active. This means the system is

preset to select a line for you when you lift the handset or press S.

The system will automatically select a ringing line before an idle line, and

an idle line before the primary line. If both lines are idle or ringing, the

primary line is selected. If you have manually selected a line, the selection

is active for five seconds and overrides automatic selection.

When Automatic Line Selection is off, the primary line will be selected

unless you select a line manually.

Automatic Redial

This phone can automatically and repeatedly redial the last number you

called. Press L or l, then press A without lifting the

handset, pressing K or pressing h. You will hear the numbers

being dialed. When the call is answered, you must either lift the handset or

press K to talk.

If the called line is busy, the phone will redial every 40 seconds up to

10 times (timing begins when the phone is on hook).

To stop automatic redialing at any time, press A again. Lifting

the handset or pressing h or K will also cancel automatic redial.

NOTE: This feature works only when the handset is on hook.

Switching Between Lines During a Call

During a call on one line, you can make or answer a call on the other line

by pressing H. You can use the H and LINE buttons to switch back

and forth between calls as often as necessary.

Example: While using Line 1, Line 2 rings:

1 Press H to hold Line 1.

2 Press l to answer the other call.

3 Press L to hang up Line 2 and return

to your first call

— OR —

Press H to hold Line 2, and press L

to return to your first call.

972_00_1ATT BOOK 12/4/01 1:37 PM Page 15

1 ... 17 18 19 ... 29

No comments

Att 972 User Manual Page 18