Att 972 User Manual download pdf (Page 9)

• If you have two separate jacks, plug the free end of the cord

with the blue plugs into the modular wall jack for Line 1.

Plug the free end of the cord with the clear plugs into the

modular wall jack for Line 2. Make sure the cords snap firmly

into place.

4 Connect the handset to the telephone.

Plug the coiled cord into the handset jack on the side of the

phone. Plug the other end of the coiled cord into the handset, and

then hang up.

5 Connect the power cord.

CAUTION: Use only the power cord supplied with this phone.

If you need a replacement cord, call 1 800 222-3111.

Fit the power cord behind the strain relief tab. Then plug the

smaller end of the power cord into the jack labeled POWER at

the back of the system. Plug the power cord into a standard

electrical outlet not controlled by a wall switch.

6 Check for dial tone.

Press L, then lift the handset or press S and listen for a

dial tone. Then press l and listen for a dial tone. If you do not

hear a dial tone, see IN CASE OF DIFFICULTY.

7 Confirm Lines 1 and 2.

Press L and call one of your phone numbers. If you hear a

busy signal, you called Line 1. If you hear a ringing signal in the

receiver, then you called Line 2.

8 Select Display Language.

The screen displays ENGLISH (flashing) and ESPANOL. The flashing

language is the selected language. Use CALL LIST + or CALL LIST

- to select the other language, then use the softkey to select OK.

INSTALLATION

Adapter

Power

Cord

Telephone Line

Cord with blue

modular plugs

Telephone Line Cord with

clear modular plugs

Modular

Jack for

Line 1

Modular

Jack for

Line 2

972_00_1ATT BOOK 12/4/01 1:37 PM Page 6

1 2 3 4 5 6 7 8 9 10 ... 29

Comments to this Manuals

No comments

Att 972 User Manual Page 9

Comments to this Manuals

Related products and manuals for Phones Att 972